Edge-Core ECS3510-28F, Руководство по установке, Страница: 46 / 72

C
HAPTER
4
| Making Network Connections
Fiber Optic Devices
– 46 –
3.
Connect fiber devices to the switch.
a.
For connections to the CPE, connect one end of the cable to the SC port
on the switch and the other end to the CPE at the subscriber’s
premises. Note that this requires an internal splice and SC connection
for the single-mode fiber, which should be performed by trained service
personnel only.
Figure 15: Making SC Port Fiber Connections
b.
For SFP connections, connect one end of the cable to the LC port on the
switch and the other end to the port on the other device. Since LC
connectors are keyed, the cable can be attached in only one
orientation.
Figure 16: Making SFP Port Fiber Connections
Single Fiber
SC connector