Edge-Core ECS2020 Series Скачать руководство пользователя страница 22

Страница: 22 / 115

Figure 4-15: Port Mirroring Configuration Information

In the Port Mirroring is a property list which shows the configuration of the current mirror switch:

Mirroring group: mirroring group ID, can be configured up to seven mirroring group;

Source Port: The port forwarding on the source data is mirrored to the destination port;

Destination port: mirror data sent to the destination port.

Port aggregation port can not be used as the destination port and source port;

Destination port and source port can not be the same;

Same group mirroring group can have only one destination port.

4.5.2

Add port mirroring group

On the panel, select "Source Port" and "Destination Port" add port mirroring group.

Figure 4-16: Add Port Mirroring Group

Figure 4-17: Add Port Mirroring Group Results

Содержание ECS2020 Series




















































































































Результаты поиска

Содержание ECS2020 Series

Отзывы:

Edge-Core ECS2020 Series, Руководство по управлению веб-системами, Страница: 22 / 115

Результаты поиска

Содержание ECS2020 Series

Отзывы: