Edge-Core EAP101, Руководство пользователя

Страница: 56 / 62

Chapter 5
| System Settings
Services
– 56 –
The following items are displayed on this page:
■
Enabled — Click to enable or disable the user account.
■
Username — The name of the user. (Range: 1-32 ASCII characters, no special
characters)
■
Password — The user password. (Range: 6-20 ASCII characters, case
sensitive, no special characters)
Services
The Services page allows you to control SSH management access to the AP,
configure NTP time servers, and configure iBeacon settings.
SSH
The Secure Shell (SSH) can act as a secure replacement for Telnet. The SSH
protocol uses generated public keys to encrypt all data transfers passing between
the access point and SSH-enabled management station clients and ensures that
data traveling over the network arrives unaltered. Clients can then securely use the
local user name and password for access authentication.
Note that SSH client software needs to be installed on the management station to
access the access point for management via the SSH protocol.
Figure 40: SSH Settings
The following items are displayed on this page:
■
SSH Server — Enables or disables SSH access to the access point.
(Default: Enabled)
■
Port — Sets the TCP port number for the SSH server on the access point.
(Range: 1-65535; Default: 22)
■
Allow SSH from WAN — Allows SSH management access from the WAN.