manualshive.com logo in svg

Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 270 / 1116

Поделиться
Скачать
Edge-Core AS5700-54X Скачать руководство пользователя страница 270

Chapter 8

  |  General Security Measures

Network Access (MAC Address Authentication)

–  270  –

Command Usage

◆

When enabled on a port, the authentication process sends a Password 
Authentication Protocol (PAP) request to a configured RADIUS server. The user 
name and password are both equal to the MAC address being authenticated.

◆

On the RADIUS server, PAP user name and passwords must be configured in the 
MAC address format XX-XX-XX-XX-XX-XX (all in upper case).

◆

Authenticated MAC addresses are stored as dynamic entries in the switch 
secure MAC address table and are removed when the aging time expires. The 
maximum number of secure MAC addresses supported for the switch system is 
1024.

◆

Configured static MAC addresses are added to the secure address table when 
seen on a switch port. Static addresses are treated as authenticated without 
sending a request to a RADIUS server.

◆

MAC authentication, 802.1X, and port security cannot be configured together 
on the same port. Only one security mechanism can be applied.

◆

MAC authentication cannot be configured on trunks (i.e., static nor dynamic).

◆

When port status changes to down, all MAC addresses are cleared from the 
secure MAC address table. Static VLAN assignments are not restored.

◆

The RADIUS server may optionally return a VLAN identifier list. VLAN identifier 
list is carried in the “Tunnel-Private-Group-ID” attribute. The VLAN list can 
contain multiple VLAN identifiers in the format “1u,2t,” where “u” indicates 
untagged VLAN and “t” tagged VLAN. The “Tunnel-Type” attribute should be 
set to “VLAN,” and the “Tunnel-Medium-Type” attribute set to “802.”

Example 

Console(config-if)#network-access mode mac-authentication

Console(config-if)#

network-access port-

mac-filter

Use this command to enable the specified MAC address filter. Use the 

no

 form of 

this command to disable the specified MAC address filter.

Syntax

network-access port-mac-filter

 

filter-id

 

no network-access port-mac-filter

 

filter-id

 - Specifies a MAC address filter table. (Range: 1-64)

Default Setting 

None

Содержание AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов