manualshive.com logo in svg

Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 186 / 1116

Поделиться
Скачать
Edge-Core AS5700-54X Скачать руководство пользователя страница 186

Chapter 5

  |  SNMP Commands

SNMP Target Host Commands

–  186  –

SNMP Target Host Commands

snmp-server enable

traps

This command enables this device to send Simple Network Management Protocol 
traps or informs (i.e., SNMP notifications). Use the 

no

 form to disable SNMP 

notifications.

Syntax 

[

no

]

 snmp-server enable traps

 [

authentication

 | 

ethernet cfm 

| 

mac-notification [interval 

seconds

]]

authentication

 - Keyword to issue authentication failure notifications.

ethernet cfm 

- Connectivity Fault Management traps. For more 

information on these traps, see 

“CFM Commands” on page 681

.

mac-notification 

- Keyword to issue trap when a dynamic MAC address is 

added or removed.

interval 

- Specifies the interval between issuing two consecutive traps. 

(Range: 1-3600 seconds; Default: 1 second)

Default Setting 

Issues authentication and link-up-down traps.
Other traps are disabled.

Command Mode 

Global Configuration

Command Usage 

◆

If you do not enter an 

snmp-server enable traps

 command, no notifications 

controlled by this command are sent. In order to configure this device to send 
SNMP notifications, you must enter at least one 

snmp-server enable traps

 

command. If you enter the command with no keywords, both authentication 
and link-up-down notifications are enabled. If you enter the command with a 
keyword, only the notification type related to that keyword is enabled. 

◆

The 

snmp-server enable traps

 command is used in conjunction with the 

snmp-server host

 command. Use the 

snmp-server host

 command to specify 

which host or hosts receive SNMP notifications. In order to send notifications, 
you must configure at least one 

snmp-server host

 command. 

◆

The authentication, link-up, and link-down traps are legacy notifications, and 
therefore when used for SNMP Version 3 hosts, they must be enabled in 
conjunction with the corresponding entries in the Notify View assigned by the 

snmp-server group

 command.

Example 

Console(config)#snmp-server enable traps link-up-down

Console(config)#

Содержание AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов