Edge-Core AS5700-54X, Справочное руководство CLI, Страница: 178 / 1116

Chapter 4
| System Management Commands
Time Range
– 178 –
time-range
This command specifies the name of a time range, and enters time range
configuration mode. Use the
no form to remove a previously specified time range.
Syntax
[ no ] time-range name
name - Name of the time range. (Range: 1-32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
This command sets a time range for use by other functions, such as Access
Control Lists.
◆
A maximum of eight rules can be configured for a time range.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (335)
absolute
This command sets the time range for the execution of a command. Use the no
form to remove a previously specified time.
Syntax
absolute start hour minute day month year
[ end hour minutes day month year ]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july | august |
september | october | november | december
year - Year (4-digit). (Range: 2013-2037)