EDER EHA150, Руководство по эксплуатации

Страница: 5 / 8

245503_00 | 10.2021 EDER hydraulic power unit 5
EN
Check the engine oil level before each use.
The oil tank of the hydraulic unit is filled with 5 litres of mineral hydraulic oil (HLP ISO 46)
on delivery.
Connect the hydraulic hoses correctly before starting
the engine. The pressure line is marked with a "
P " on
the EDER hydraulic unit. Make sure that the pressure
line and the return hose are connected correctly. The
hoses and the hydraulic connections on the power unit
must be kept clean.
Incorrectly connected or dirty hydraulic hoses can cause
damage to the connected unit.
Do not start the engine until both hydraulic hoses are
connected.
Maintenance
Check the operating materials daily before each work operation:
The engine oil level must be checked with the dipstick on the engine in accordance with the
operating instructions for the petrol engine and topped up if necessary. The content of the
hydraulic oil reservoir must be checked by unscrewing the red screw cap of the filler opening
and topped up at the latest when the minimum oil level is reached or fallen short of. Only
use mineral hydraulic oil that complies with the following specification:
HLP ISO 46 .
During use, pay attention to unusual operating noises and possibly leaking or damaged fluid
lines and screw connections. If a defect is suspected, you must take the unit out of operation
and eliminate the cause or have it checked and repaired at a specialist workshop to avoid
further consequential damage.
Clean dirty components regularly.
Only original spare parts from EDER Maschinenbau GmbH or the engine manufacturer are
to be used as replacements for defective parts!
Recycling
The EDER splitting unit contains oils/greases and must be disposed of by a recycling
company.