Catalog #68982, #68983
©2006 Edelbrock Corporation
Page 1 of 2
Brochure #63-68982
Rev. 5/06 - DA/mc
®
TUBULAR EXHAUST SYSTEM
For 1993-1995 Chevy/GMC Pick-Up, 1500 Series, 2 & 4 WD,
Auto & Standard Transmission with 4.3L V6 T.B.I. without A.I.R.
Catalog #68982, #68983
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new
Tubular Exhaust System (TES). If you have any questions, please
contact our
Technical Hotline at : 1-800-416-8628
from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at
. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM:
T
hese components are designed to improve the exhaust efficiency of the GM T.B.I. (Throttle Body
Injection) V6 engine. A performance gain can be expected by the installation of the system. This system does require welding for
installation and retains all O.E.M. emissions equipment.
Suggested Tools Needed for Installation:
This vehicle has some metric fasteners.
❑
Mig welder (recommended) or gas welder—Professional welding is highly recommended.
❑
3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets.
❑
Combination set of open-end wrenches.
❑
Hacksaw.
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
NOTE:
Some models will require a special power steering pulley puller, K-D 2897 or equivalent.
SPECIAL NOTICE:
This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air
Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we
have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement on the vehicle for which
it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and engine specifications decal. Do not
cover any part of your original emission decal.
WARNING:
The use of "Thermal Wrap" or any aftermarket coating process
will void the warranty
on your Edelbrock Tubular
Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.
NOTE:
High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.
Qty.
PN
Description
❑
1
25-9439
Header left side (#68982)
❑
1
25-9438
Header right side (#68982)
❑
1
25-9051
Header left side (#68983)
❑
1
25-9052
Header right side (#68983)
❑
1
25-9586
Extension pipe left side
❑
1
25-9587
Extension pipe right side
❑
10
36-0710
Hex header bolts; 3/8” 16 x 1
❑
2
36-6438
Ferry bolts: 3/8” x 2-3/4”
❑
1
46-1060
Flange connector
❑
3
-
Flat washers; 3/8”
Qty.
PN
Description
❑
1
52-8097
O2 Sensor plug
❑
1
68-1330
Hex cap screw 1/4-20 x 1
❑
4
68-8550
Hex cap screw 3/8”-16 x 2”
❑
1
25-9604
Spacer tube; 3/8” O.D. x 1/2” Long
❑
2
25-9605
Spacer tube; 5/8” O.D. x 1-1/2” Long
❑
14
82-5590
Lock washers; 3/8”
❑
2
54-0262
Gasket manifold port
❑
2
54-0414
Donut gaskets 2-1/4”
❑
1
46-5183
U-clamp; 2-1/4”
❑
2
-
Spark plug connector boots
❑
2
-
Spark plug terminal ends
KIT CONTENTS
Catalog #68982 (Ceramic-Coated), #68983 (Ti-Tech Coated)
