©2005 Edelbrock Corporation
Rev. 7/05 - DA/mc
Page 1 of 2
Catalog #66642 & #66643
Brochure #63-0429
TUBULAR EXHAUST SYSTEM
For 1997-1998 Dodge Dakota, 2&4 WD, 5.2L / 5.9L V8, Auto Transmission
1997-1998 Dodge Durango, 4WD, 5.2L / 5.9L V8, Auto Transmission
Catalog #66642, #66643
INSTALLATION INSTRUCTION
Please study these instructions carefully before installing your new
Tubular Exhaust System
(TES). If you have any
questions, please contact our
Technical Hotline at : 1-800-416-8628
from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at
. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM:
These components are designed as a system to improve the exhaust efficiency of the
Chrysler 5.2L and 5.9L V8 engine. They are constructed of 409 HP stainless steel to better withstand the high heat present
with the fuel-injected engine, especially when used for towing or other heavy duty applications. The stainless steel used
for these systems is much more durable than mild steel, although it does not appear different in appearance. These
systems come with a coat of black paint for good looks and protection during shipping and storage, and they can be
identified by the part numbers on each of the major components. Note that a magnet will stick to this type of stainless
steel; magnetic attraction is not a valid test for these systems. A performance gain can be expected by the installation of
the system. This system
does not
require welding for installation and retains all O.E.M. emissions equipment.
•
Suggested Tools Needed for Installation:
This vehicle has some metric fasteners.
— 3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets
— Combination set of open-end wrenches
— Hack saw
— Jackstands, screwdrivers, pliers, crescent wrench, etc.
— Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
•
SPECIAL NOTICE:
This Edelbrock part has received an Executive Order number (E.O. #) from the California Air
Resources Board (C.A.R.B.) making it legal for street use on pollution-controlled motor vehicles in all 50 states. To
assist you with emissions equipment certification, we have included a silver fan shroud decal to verify that this part is
a legal replacement part on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed to your
fan shroud next to the existing emission and engine specification decal. Do not cover your original equipment
specification decal with the Edelbrock fan shroud decal.
•
WARNING:
The use of “Thermal Wrap” or any aftermarket coating process will void the warranty on your Tubular
Exhaust System. Those products can cause excessive heat and moisture buildup resulting in corrosion and early
failure of the system.
•
NOTES:
High temperature spark plug wires and boots are recommended to withstand head from T.E.S.
