TriTrax™ 200 Vertical Crawler
Document: UMDT017749.docm
Revision: A02
Created by: JS
Date: 13 Apr 2021
IPN: 3094329-A02
Source Location: C:\ePDM\ISLEng\Products\DT-VersaTrax100MkII\Manuals\UMDT017749.docm
Page 7 of 36
User Ma
nual
•
All personnel operating or maintaining this equipment must be trained and competent.
•
Eddyfi equipment is used in many varied environments from hot/dry to confined spaces to deep
underwater. Such diverse environment risks must be addressed by the operators who are trained
to work in such surroundings. As such, the operator is responsible to determine safe site setup,
operating procedures and personal protective equipment (PPE) for safe deployment, operation and
maintenance of the equipment.
WARNING: Spark Hazard
- Under no circumstances should this equipment be
used in a potentially explosive atmosphere.
WARNING: Trip Hazard
- Never stand on the tether. A snap load to the tether may
pull it out from underneath you and cause you to fall. Standing on the tether may
also damage its internal conductors, cause unnecessary wear, and decrease its life.
WARNING: High Temperature
- The camera head and auxiliary lights may be-
come extremely hot during operation. Allow a cool-down period before handling.
WARNING: Mechanical Pinch Hazard
– Rotating or moving components can draw
fingers into a pinch position. Do not handle the vehicle while mobile parts are run-
ning, turn off power or disconnect the tether while reconfiguring or maintaining the
vehicle.
Intended Use
The TriTrax™ 200 is an industrial inspection vehicle intended for crawling vertically or horizontally inside
pipes which may be dry or flooded up to 30m (100 ft.)
Typical applications include inspection of:
•
Sewer and storm drains
•
Hydroelectric pipe and infrastructure
•
Steam headers
•
Tanks and pressure vessels
•
Oil and gas refineries and pipelines
•
Pulp and paper mills
