eddyfi R-Scan Array, Руководство пользователя

Страница: 7 / 31

7
Conventions
Safety Indications in This Document
The safety indications in this document are intended to ensure operator safety and the integrity of
the system.
DANGER!
Danger statements are a description of an imminent hazardous procedure or a practice (or the like)
that, if performed incorrectly, can result in severe injury or death if not avoided and should be
limited to the most extreme situations. Do not ignore danger indications, ensure the condition is
understood before proceeding.
WARNING!
Warning statements are a description of a potentially hazardous procedure or a practice (or the
like) that, if not avoided or if performed incorrectly, could result in injury. Do not ignore warning
indications, ensure the condition is understood before proceeding.
CAUTION!
Caution statements are a description of a potentially hazardous procedure or a practice (or the
like) that, if not avoided or if performed incorrectly, could result in material damage, loss of data,
or both. Do not ignore caution indications, ensure the condition is understood before proceeding.
TETHER LINE
A suitable safety line must be attached to the handle of the R-Scan Array scanner during manual
operation. Attach the tether line BEFORE placing the R-Scan Array scanner onto the inspection
surface.
IMPORTANT
Calls the attention to information important to completing tasks.
NOTE
Calls the attention to an operating procedure, a practice, or the like that requires special attention.
Limited Warranty
LIMITED PRODUCT WARRANTY: Except as otherwise agreed to by EDDYFI in writing, products such
as instruments, mechanical products, spare parts, probes and cables are warranted, to the original
Customer only, for use solely by Customer or direct affiliate, against defects in material and
workmanship for a period of twelve (12) months from the date of delivery. Additional coverage may
be provided under any Hardware Maintenance Plan (HMP) purchased by the Customer. Probes and
cables are considered consumables and require periodic replacement due to wear. EDDYFI does not
warrant the service life of probes, cables and other consumables. EDDYFI does not warrant any
products against damages or defects caused by wear and tear, negligence, misuse, abnormal
operating conditions, alterations or damage caused by events beyond the control of EDDYFI. EDDYFI
shall not be liable for product defects caused by or resulting from any inaccuracies in any drawing,
description or specification supplied by the Customer. Upon Customers written request during the
warranty period, EDDYFI, at its choice, will repair or replace defective products within a reasonable
time. The original term of warranty applies, without extension, for repaired or replacement
products. All defective product shall be sent to EDDYFI freight prepaid by Customer in packaging
appropriate to prevent damage in transit. The Limited Product Warranty does not apply to periodic