Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 7 of 25
User Ma
nual
System Power
Power Requirements
The Versatrax 50
™ is operated through an
ICON
™ Portable Controller
. The ICON Portable Controller
provides power to the tether and vehicle.
Power Input: Refer to the ICON Portable Controller User Manual for specifications.
Generators / Inverters
If powering the system f
rom a generator or inverter, refer to that unit’s operating manual for
recommendations on continuous and peak load ratings. These power sources may apply a reduced output
rating based on electrical load and environmental temperature. Remember to include the power needs of
all other connected devices (external monitors, recording devices, lighting, etc.) when selecting a generator
or inverter.
Safety
In order to be able to use this product properly and safely, every user must first read these operating
instructions and observe the safety instructions contained therein. Take care of these operating instructions
and keep them in a place where they can be accessed by everyone. Untrained personnel should not handle
or operate this equipment.
This system includes some specific devices that have their own User Manuals. Instructions on those
manuals must be also read before using the system.
CAUTION:
Failure to follow these safety instructions may result in injury or
equipment damage.
WARNING:
Intense Optical Radiation
-
The Versatrax 50™ camera lights are
extremely bright. Never look directly at the lights. Use a welding filter (shade #8 or
higher) if inspecting the LEDs.
WARNING: Spark Hazard
- Under no circumstances should this equipment be
used in a potentially explosive atmosphere.
