Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 21 of 25
User Ma
nual
4. Visually inspect the traction wheels for free movement and roundness. If the wheel is severely
damaged or jammed a new one should be installed.
5. Ensure that all fasteners are in place and secure.
Weekly
1. Verify by visual inspection that there are no traces of oil near or on the sides of the drive wheel
and the track belt. This would indicate that the oil seals may have been damaged by debris or
have become worn by abrasion.
2.
If necessary, remove the belt and thoroughly clean the track.
Troubleshooting
Video Problems
1. No video (black or blue background).
•
Interface box is not turned on.
•
Video cables are not hooked up between interface box and computer.
•
Camera connector on vehicle is loose (turn power off first before plugging in camera).
•
Check monitor input settings.
•
Vehicle power is not on.
•
Check for problems with other video components between the computer and monitor.
•
Try a different video cable or auxiliary monitor. Whole days have been spent on field maintenance
trips only to discover a faulty monitor or cable.
2. Picture is very dark or very bright.
•
Visually check the light levels of the camera.
•
Ensure the camera port window and light windows are clean.
3. Intermittent picture.
•
Check and replace the video cables.
•
Check the monitor is working properly.
•
Check that the camera harness whip is fully plugged in.
•
Check for intermittent breaks in the camera harness cable.
•
Check the tether connectors at both controller and vehicle.
•
Check for tether or slip ring damage by testing tether continuity.
4. Picture is blurry, will not focus, or has poor color.
•
This may be a dirty camera view port, or a narrow object lying close in front of the view port.
•
Object may be too close to the camera.
