background image

52

Appendix A: Accessories

Protective Caps

Protective Caps

If you need to tackle challenging inspection environments where dust or nuclear 

contamination is present, you need protective caps to cover the Ectane

®

 2’s 

connectors. All the connectors have specific protective caps. Contact your Eddyfi 

representative for more information about pricing and availability.

Adapters and Connectors

The Ectane 2 connectors were chosen to match the most common connectors in use 

today. You could, however, have specific needs outside the connectors supplied 

with the Ectane 2. Eddyfi offers a comprehensive array of adapters and specialty 

connectors to suit your needs. Contact your Eddyfi representative for more 

information about pricing and availability.

Battery Charger and Batteries

The Ectane 2 comes with batteries. Depending on your work environment and 

your workload, however, you could have a need for more and the optional battery 

charger. Contact your Eddyfi representative for more information about pricing 

and availability.

Remote Control

The Ectane 2 can be operated through an optional remote control. Contact your 

Eddyfi representative for more information about pricing and availability.

Содержание Ectane 2



























































Отзывы: