Eddyfi Technologies TSC U41, Руководство пользователя

Страница: 23 / 72

Figure 1-13
Software - Test network settings
For the ‘U41 - Ethernet’ instrument Type line, check for the following.
x x
The Status column is not a green tick
x x
The Details column contains an alert icon
x x
There is no ‘U41 -Ethernet’ instrument Type present
If any of these conditions are found, there could be a problem with the LAN configuration. First
wait for at least one minute for the system to auto-adjust to any LAN environment changes.
If the problem continues, some adjustment to cabling or network settings of the U41 system or
laptop may be necessary. Information about the type of problem may be found by holding the
mouse over the Status, Config or Details icons or by clicking on the Details icon.
For guidance on how to configure the U41 system network settings, see Alternative LAN
Topologies on page 8
Operation with ROV
U41 subsea bottle to Topside Unit protocols
[Important: The integration cable should be connected while performing these changes to
ensure communication to the subsea bottle is not lost.]
To establish successful communication requires setting matching configurations in both the
Topside Unit and U41 subsea bottle.
Topside Unit configuration
From the Backstage/General tab, configure the Topside Unit by pressing the Configure Topside
Unit R button.
Figure 1-14
Operation with ROV - Topside configuration
Then from the dialogue like the one shown below, select the ‘Topside Unit’ instrument and click