Versatrax 100™
Document: UMDT013103.docm
Revision: A10
Created by: KJB
Date: 26 Sep 2019
3070984-A10
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 4 of 41
Us
er
M
an
u
al
About This Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi
Technologies equipment. Correct and prudent operation rests with the operator who must thoroughly
understand the operation, maintenance, service and job requirements. The specifications and information
in this manual are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual endeavors to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality
may differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice. Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government or site regulations.
This manual is copyright © 2019 by Inuktun Services Ltd. All rights reserved.
System Description
Description of Equipment & Intended Use
The Inuktun Versatrax 10
0™ (VT100) system is a 4000 series Inuktun Microtrac™ based vehicle used for
navigating pipes of 4 to 12 inch (100 mm to 300 mm) internal diameter with the camera centered. The track
mechanism is further adjustable to very large diameters or flat surfaces.
The inspection system has been manufactured with the hazards and demands of pipe inspection in mind. A
minimized vehicle profile provides maximum clearance for passage of service intrusions in the pipe. The
vehicle employs marine technology for underwater operation at up to 200 feet (60 m) depth.
All Versatrax hardware can be used dry, underwater, or in dirty, muddy conditions. The rugged design
ensures a long service life and helps protect the vehicle from damage during normal use.
Typical applications include inspection of:
•
Sewer and storm drains
•
Hydroelectric pipe and infrastructure
•
Tanks and pressure vessels
•
Oil and gas refineries and pipelines
•
Pulp and paper mills