- 1 -
Need It. Rent It!
Hejny
Rentals,
Inc.
Contractor, Lawn & Garden, and Party Equipment Rentals
1829 White Bear Ave. - Maplewood, MN 55109
Phone: 651-770-3841 – Fax: 651-770-1725
www.hejnyrental.com
Edco 2ECEGNG Dual-Disc Concrete Grinder
ELECTRICAL POWERED EQUIPMENT
Extreme care must be taken when operating electric models with water present: Ensure power cord is properly
grounded, is attached to a Ground-Fault-Interrupter (GFI) outlet, and is undamaged.
• Check all electrical cables - be sure connections are tight and cable is continuous and in good condition. Be
sure cable is correctly rated for both the operating current and voltage of this equipment.
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with
qualified electrician or service person if there is any doubt as to whether the outlet is properly grounded.
Adhere to all local codes and ordinances.
• NOTE: In the event of a malfunction or breakdown, grounding provides a path of least resistance for the
electric current to dissipate. The motor is equipped with a grounded plug and must be connected to an outlet
that is properly installed and properly grounded. DO NOT modify the plug provided on the motor. If the plug
does not fit the outlet have a qualified electrician install the proper receptacle.
• Switch motor OFF before disconnecting power.
Do not disconnect power by pulling cord. To disconnect, grasp the plug, not the cord.
• Unplug power cord at the machine when not in use and before servicing.
GENERAL INSTRUCTIONS
• Equipment should only be operated by trained personnel in good physical condition and mental health (not
fatigued). The operator and maintenance personnel must be physically able to handle the bulk weight and
power of this equipment.
• This is a one person tool. Maintain a safe operating distance to other personnel. It is the operators’
responsibility to keep other people (workers, pedestrians, bystanders, etc.) away during operation. Block off
the work area in all directions with roping, safety netting, etc. for a safe distance. Failure to do so may result in
others being injured by flying debris or exposing them to harmful dust and noise.
• This equipment is intended for commercial use only.
• For the operator’s safety and the safety of others, always keep all guards in place during operation.
• Never let equipment run unattended.
Personal Protection Equipment and proper safety attire must be worn when operating this machinery. The
operator must wear approved safety equipment appropriate for the job such as hard hat and safety shoes
when conditions require. Hearing protection MUST be used (operational noise levels of this equipment may
exceed 85db). Eye protection MUST be worn at all times.
Keep body parts and loose clothing away from moving parts. Failure to do so could result in dismemberment or
death.
• Do not modify the machine.
• Stop motor/engine when adjusting or servicing this equipment.
Maintain a safe operating distance from flammable materials. Sparks from the cutting-action of this machine
can ignite flammable materials or vapors.
DUST WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects, or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints, and
• Crystalline silica from bricks and concrete and other masonry products.
