manualshive.com logo in svg

edc HAZ-DUST HD-7204, Руководство пользователя, Страница: 26 / 93

Поделиться
Скачать
edc HAZ-DUST HD-7204 Скачать руководство пользователя страница 26

26 

 

 

 

Introduction 
 

An audible alarm can be set to alert the worker of approaching threshold limits.

 

 

 
Alarm settings 
 

The concentration level should be set to the defined agency standard for the particulate type being 
sampled or users preference.  

 
Using the alarm 
  

1.

 

From the “Home Screen” Press Aerosol. Press the Pen Icon to edit.  
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting the Alarm 

 

 

3.

 

Next select Ceiling Alarm or S.T.E.L alarm. If desired, the engineering units can be changed. To 
change the engineering units press “units.”   Press the green checkmark to confirm selection.                                                          

Note:

  Once the green checkmark is pressed, the dust profile screen reappears. The user 

must press the green arrow on this screen as well, or the changes will not be saved.  

 

Содержание HAZ-DUST HD-7204






























































































Отзывы:

Нет отзывов