C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 54 -
5.5.2 Making Comparison with an Existing Case
Click the
Comparison Analysis
button at the lower left corner of the
Analysis
interface. The
Comparison Analysis
page is displayed. For specific operations on this page, see section
5.5.3 Performing R-way Evaluation
NOTE:
1. The
R-way Evaluation
tab is available only when the USB Sentinel for R-way
evaluation is connected to the computer and R-way evaluation is enabled (see
section
5.12.2.11Enabling R-way Evaluation
2. The R-way evaluation is not available in the United States.
On the
R-way Evaluation
tab, you can observe normal saline test images, acetic acid solution
test images and Lugol's iodine test images, observe whether there are continuous hemorrhagic
spots and make labels as required. The system will offer colposcopic preliminary diagnose and
treatment suggestion based on your observation and labels.
Figure 5-27
1 Labeling area
2 Image preview area
3 Evaluation step area
When the cursor is placed on an image in the
Current Patient Image
area, this image will be
displayed in the image preview area. You can double-click the image in the image preview area to
magnify it, and you can move the magnified image during evaluation.
In the evaluation step area, perform operations as instructed. During the process, you may be
asked to mark labels on the image in the labeling area. Click on the image to add labels. If you
need to delete a label, click it or right-click it and choose
Delete
. You can delete a label only in
1
2
3
