C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 50 -
Select
Manual
and draw a line on the image with your mouse. Input the length (mm) of the line
and click
OK
. If you input 0 or any other invalid value, the following prompt will be issued:
The input value is invalid, please input again
.
Figure 5-22
Then you can measure the image by
Line
,
Perimeter
or
Area
, and the measurement result will
be displayed nearby.
You can drag the measurement result to an appropriate position.
To delete a piece of measurement data, right-click it, and choose
Delete
. You can click
Clear
Data
to clear all the measurement data on the image.
Clear
Save
, the current image with all the measurement data on it will be saved as a new image
and displayed in the patient image list. If you switch to the
Image Editing
tab, the measurement
data will be cleared.
3
）
Compute Lesion Percentage
a)
Select lesion compute function
b)
Select the lesion region, draw the lesion region on the image with a mouse.
c)
Select the cervical region
，
draw the cervical region on the image with a mouse.
d)
Compute the percentage of the lesion region that accounts for the cervical region.
5.4.10 Import Image
Right click
Current Patient Image
region and select
Import Image
and the image selection
