C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 41 -
Figure 5-13
Click the
Follow-up
tag, the follow-up patients to be processed in or before the specified
follow-up period will be displayed. The list shows the patients by follow-up date in ascending
order, and the
Follow-up
tag shows the total number of records. For setting of the follow-up
period, see section
5.12.2.2Setting Follow-up Period
Select a patient in the list, her information will be displayed in the area above. You can modify
the follow-up status, follow-up date, or remark, and click
Save
. The inputted follow-up date
cannot be earlier than the current day. If the follow-up status is changed to
Cancelled
, the
follow-up visit will be cancelled for the patient; if changed to
To Appointment
, the system will
make the appointment for the patient, and the
Appointment
interface shows this appointment
record, in which the appointment time is the follow-up date.
Input search conditions in the
Search
area, and click
Search
, all the patients that meet the
conditions will be displayed in the follow-up list. Click
Refresh
, the original follow-up list is
shown again.
Click
Cancel All
, the follow-up status of all the patients whose follow-up date has expired will be
set to
Cancelled
.
NOTE:
You cannot modify information of the patients whose follow-up status is "To
Appointment".
5.3.12 Bar Code Scanner Function
When the bar code scanner is connected to the system, you can activatethe scanner function and
enter patient information by scanning patient bar code.
After
thebar
code
scanner
function
is
enabled
(
System
Setup>General
Setup>ScannerSetup>On
), you can scan the patient bar code on the
Patient
interface or
