background image

Ziza® Interior Lighting Package Installation Procedures 

R

Part Number

 

ES2538942

for VW CC

This tutorial is provided as a courtesy by ECS Tuning.

Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety 

of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools 

and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could 

damage the vehicle or compromise its safety.

Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is 

made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this mate-

rial. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS 

MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its affiliates be liable for 

any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.

Содержание Ziza ES2538942












Отзывы: