ECRM Mako 8 CTP, Руководство оператора, Страница: 7 / 56

1
AG114123 Rev. 2 1
Requirements
and Safety
Introduction to the System
Plates are loaded by manually positioning the plate against the pin
bar registration system. When sensors determine the plate is
properly positioned, the plate is automatically moved into the
imaging unit and imaged. After that, the exposed plate is moved
onto the media transport, which feeds the plate into a customer-
supplied plate processor.
System Requirements
System Power and Heat Dissipation
Power (maximum) 100 - 240 Volts; 3 Amps
50/60Hz, single phase.
Heat Dissipation 850 BTU/hour
Environmental Requirements
Temperature - 62 - 86 degrees F (17 - 30 degrees C)
Humidity 45 - 65%, non-condensing.
Note: Operating the system outside the ranges specified above
may affect performance.