ECRM Mako 8 CTP, Руководство оператора, Страница: 49 / 56

AG114123 Rev. 2 43
Cleaning the Rear Cover Fan Filter
There is a filtered fan in the rear cover. The fan filter can become
clogged with dust and other debris if is not cleaned regularly. A
clogged fan causes a loss of internal pressure and the increased
probability of a system malfunction.
Figure 4-1 shows where the rear cover fan filter is located. To clean
the filter:
Step 1. Turn the power switch off.
Step 2. Locate the fan filter. It is positioned over a hole in the rear, where
it is snugly fitted between the fan guard and the pan.
Step 3. Gently pinch the filter to get hold of it, and then carefully pull it out
from between the fan guard and the pan.
Figure 4-2 Removing the Fan Filter
Step 4. Wash the filter in mild, soapy water. Rinse in clean water and dry.
Step 5. Place the filter back in position between the fan and the opening
in the pan.
FAN
FILTER
HOLE
GUARD
IN
COVER