16
AG114123 Rev. 2
IGNORE THE PROCESSOR
OPTIONS
YES
or NO
“YES” stops the media transport from feeding a plate into the plate
processor.
This feature is useful when the online processor is down for
maintenance or repairs.
PROCESSOR SPEED
LIMITS
9.5”
to
77.9”
per minute
(
241mm
to
1980 mm per minute
)
Should be set to match the speed of the online processor.
REGISTRATION DELAY BEFORE PINCHING PLATE
LIMITS
0.10 seconds to 5.00 seconds
Sets the length of time the system waits to close the pinch rollers
after the plate is registered. The default setting is 0.50 seconds.
AUTOMATICALLY BEGIN IMAGING AFTER PINCHING
OPTIONS
YES
or NO
YES enables the platesetter to automatically image the plate
immediately after the pinch rollers close. NO disables the platesetter
from doing so.
When NO is selected, you must manually initiate imaging by
pressing the OK button.
Содержание Mako 8 CTP
Страница 1: ...MAKO 8 CTP Operator Guide NEWS extra...
Страница 34: ...28 AG114123 Rev 2...
Страница 46: ...40 AG114123 Rev 2...