Adjustable
Swivel Glide
E1
E2
F1
F2
Use the 5mm Hex Tool
Use both 4mm Hex Tools
Upper X-Frame (1)
Lower X-Frame (1)
Book Box (1)
Parts List
A
B
C
D
E
F
BEFORE ASSEMBLING, MAKE
SURE YOU HAVE ALL THE PARTS
Cross Supports (2)
Lower Legs (3/1)
Double Hex Post & Screws (5/5)
Hex Screws (4)
G
1
Connect the X-Frames
2
Connect the Book Box
Open Front Desk
- RTA Version -
Model# ELR-24103
Adult Assembly Required.
- Contains small parts, sharp points and edges.
- Do not stand, sit, kneel, climb, lean or pull on
unit for support.
- Never leave children unattended.
- Do not place unit near high heat or moisture.
- Adult supervision recommended.
WARNING:
TOOLS INCLUDED
Hex Tool - 5mm (1)
Hex Tool - 4mm (2)
San Diego, CA 92110 USA
www.ecr4kids.com
Place the
Upper X-Frame (B)
on top of the
Lower X-Frame (C)
and connect at the center
cross-over point with one
Double Hex Post & Screw (F1/F2)
and tighten using both of the
4mm Hex Tools.
Install the
Book Box (A)
to the connected
X-Frames (B/C)
with four
Double Hex Post &
Screws (F1/F2)
using both of the 4mm Hex Tools.