Hex Screws (12)
Use the Hex Tool.
Use a
Phillips
Screwdriver.
Batch ID
located underneath.
Middle Shelf (1)
Top Panel (1)
Left & Right Side Panels (1/1)
Parts List
A
B
C
D
E
F
G
BEFORE ASSEMBLING, MAKE
SURE YOU HAVE ALL THE PARTS
Phillips Screws & Casters (16/4)
Bottom Shelf (1)
Back Panels (2)
A1
A2
G1
G2
Install the Right Side Panel
2
Two Shelf Storage Cabinet
with Back
Model# ELR-0450-A
Adult Assembly Required.
- Contains small parts, sharp points and edges.
- Do not stand, sit, kneel, climb, lean or pull on
unit for support.
- Never leave children unattended.
- Do not place unit near high heat or moisture.
- Adult supervision recommended.
WARNING:
TOOLS INCLUDED
Hex Tool (1)
TOOLS NEEDED
Phillips Screwdriver
Install
Right
Side Panel (A2)
on to the
Top Panel (B), Middle Shelf (C
) &
Bottom Shelf (D)
with six
Hex Screws (F)
using the Hex Tool.
Note:
The grooves on the Top Panel, Middle and Bottom Shelves are away from the ground.
See Next Page
San Diego, CA 92110 USA
www.ecr4kids.com
Children climbing on furniture
can lead to death or serious
injury due to tipping. Secure
unit to wall using appropriate
hardware.
1
Install the Casters onto Bottom Shelf
Batch ID Sticker
Install the four
Casters (G2)
into the pre-drilled holes on the underside of the
Bottom Shelf (D)
,
with four
Phillips Screws (G1)
per caster, using a Phillips screwdriver.
