Instruction Manual
11
2.4.2 Sensor Operation Verification
Verify the indoor and outdoor temperature match
closely with the console and sensor array in the
same location (about 2 to 3m apart). The sensors
should be within 2°F (the accuracy is ± 1°F).
Allow about 30 minutes for both sensors to
stabilize.
3. Wireless Sensor Installation
It is recommended you mount the remote sensor
in a shaded area. Direct sunlight and radiant
heat sources will result in inaccurate temperature
readings. Although the sensor is water resistant,
it is best to mount in a well-protected area, such
as under an eve.
3.1 Mounting with Zip Tie
Mounting the sensor with a zip tie will result in
