7
INSTALL THE FAUCET
INSTALL RO ASSEMBLY AND STORAGE TANK
9”
NOTE:
Be sure to allow a minimum space of 1-1/2" under the
system for removing the cartridges in order to change them.
tank
connector
storage
tank
hanger washer (2)
screw (2)
FIGURE 4 - TUBING CONNECTIONS
BLACK TUBE
3/8” barb fitting
for the black tube
RED TUBE
1/4” barb fitting
for the red tube
BLUE TUBE
3/8” quick connect
fitting for the blue tube
FIGURE 3 - FAUCET INSTALLATION
tubing
nut
tubing
insert
1.
Hold the RO assembly up to the wall surface where
you will install it. Mark locations for the hanger washers
and screws.
2.
Fasten the hanger washers to the wall surface. Wood
screws are included for fastening to a wood surface.
Provide other screws for other surfaces as needed.
3.
Hang the RO assembly on the hanger washers.
4.
Move the storage tank into place, setting on the floor
surface. Use the stand, included with the tank, and posi-
tion the tank upright, or on its side.
5.
Apply teflon tape on the tank nipple threads and
install the tank connector.
faucet
faucet base
1/4 turn to connect
faucet base
1/4” RED tubing
rubber washer
screw
toggle bolt
3/8” BLUE tubing
3/8” BLACK tubing
1-1/4” dia. hole in
sink or countertop
