- 12 -
3. Testing The Brake System
Please hold the two brake levers on both sides of the handlebar, then trying to push the bike forward to
make sure the bike is assembled firmly, and brakes can stop the bike properly.
Please Note
: You can adjust the tightness of the brake cable lightly by adjusting the knobs on the caliper
(Figure. 6-6).
4. Please record the bike’s serial number (Figure. 6-7) and battery serial number (Figure. 6-8) on the user
manual’s last page in case of stolen or missing.
5. You are ready for riding!
Display Instrument Setting
810 LED Display
ON/OFF
: Turn on the power, press the “ON/OFF” button, the power will be turned ON or OFF.
6KM
: Walk Assist Mode, press and hold the “6km/h” button to have cruise 6km/h speed automatic
riding without pedals.
Mode
: Press the “mode” button to select the pedal assistant power with pedals and throttle (Low-
Med-High).
Power
: Power is indicating the battery power. It should be four red LED when fully charged.
