Microwave Sensor
EL-M08
Manual
Welcome to use EL-M08 Microwave Sensor!
The product is a new saving-energy switch; it adopts microwave sensor mould with
high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism,
convenience, safety, saving-energy and practicality functions. The wide detection field is
consisting of detectors. It works by receiving human motion. When one enters the detection field,
it can start the load at once and identify automatically day and night. Its installation is very
convenient and its using is very wide. Detection is possible through doors, panes of glass or thin
walls.
SPECIFICATION:
Power Sourcing: 220-240V/AC Power Frequency: 50/60Hz
HF System: 5.8GHz CW radar, ISM band Detection Range: 360°
Ambient Light: <3-2000LUX (adjustable) Installing Height: 1.5~3.5m
Rated Load: 2000W (incandescent lamp) Transmission Power: <10mW
100W (energy-saving lamp) Time-Delay: min.:10sec±3sec
Power Consumption: approx 0.9W Max.: 15min±3min
Detection Distance: 1-8m (radius) (<24
℃
) adjustable Detection Motion Speed: 0.6~1.5m/s
FUNCTION:
Can identify day and night: It can work in the daytime and at night when it is adjusted to the
“sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on
the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
SENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for
detection distance; High sensitivity with 16m, it fits for large room.
Time-Delay is added continually: When it receives the second induction signals after the
first induction, it will compute time once more on the basic of the first time-delay rest.
Time
–Delay is adjustable. It can be set according to the consumer’s desire. The minimum
time is 10sec±3sec. The maximum is 12min±1min.
NOTE: the high-frequency output of this sensor is
<10Mw- that is just one 100
th
of the transmission
power of a mobile phone or the output of a microwave
oven.
