Ecolab EcoAdd Скачать руководство пользователя страница 24

Страница: 24 / 204

2.10

Safety when using the data transfer via Bluetooth

Communication between the diaphragm metering pump and

‘EcoAPP’

is established via

an active Bluetooth

link. To achieve this the

‘EcoAdd’

diaphragm metering pump must be

equipped with a Bluetooth

PCB. If this is not already factory-fitted, this can also be retro-

fitted (accessories).

NOTICE!

The user of the

‘EcoAPP’

is responsible for the use of appropriate safety

mechanisms with the link and the data transfer between the

‘EcoAPP’

and the

‘EcoAdd’

diaphragm metering pump via Bluetooth

The safety instructions given below must be observed. Ecolab accepts no

liability for damage arising from non-observance.

Instructions on data transfer and use of Bluetooth

Update the operating system on the smartphone or tablet being used:

Many attacks utilise weak points in the operating systems and outdated Bluetooth

protocols, and for this reason smartphones and tablets must always be kept up to

date. The installation of malware protection on the smartphone or tablet offers further

protection.

Only activate Bluetooth

when required:

Bluetooth

should be switched off whenever it is not required.

Lock the ‘EcoAdd’ diaphragm metering pump with an access code:

Due to the locking of the pump described in the pump operating manual via an access
code, the pump is set to "invisible" in the Bluetooth

environment. The basic

Bluetooth

function is retained, but the

‘EcoAdd’

is only detectable by entering the

access code within the

‘EcoAPP’

Check the active instruments in Bluetooth

Overview:

Only connect known instruments to the smartphone or tablet. If you want to connect

unknown instruments, these should first be checked, or identified and rejected as

necessary

Note other instruments in the reception range!

Only perform pairing with other instruments when there are no other (unknown)
instruments in the reception range and check automatic pairings. Bluetooth

instruments generally establish connections automatically when this function is

switched on. For this reason, regular checks should be performed as to which

instruments are being used to connect automatically to the smartphone or tablet used.

This is displayed in the settings for the smartphone or tablet. If there are unknown

instruments there, the corresponding pairing should be disconnected.

2.11

Installation, Maintenance and Repairs

NOTICE!
Material damage by using incorrect tools!

Material damage may arise by using incorrect tools during assembly,

maintenance or troubleshooting.

Only use the correct tools.

Safety

Rev. 2-05.2018

Содержание EcoAdd













































































































































































































Результаты поиска

Содержание EcoAdd

Отзывы:

Бренды по названию

Популярные бренды

Ecolab EcoAdd, Руководство по эксплуатации

Результаты поиска

Содержание EcoAdd

Отзывы:

Бренды по названию

Популярные бренды