Ecolab DG1-III-DLA-PCB, Руководство по эксплуатации

Страница: 81 / 212

1.4 Storing
Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be complied with accordingly.
n Do not store outdoors.
n Store in a dry and dust-free place.
n
Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature: +5 to 40°C.
n Relative humidity: Max. 80 %.
n If stored for longer than 3 months, regularly check the condition of all parts and
packaging. If necessary, refresh or renew packaging.
n Storage must be frost-proof.
NOTICE!
Intermediate storage
– The packaging is designed for a storage period of 3 months.
– If the equipment should not be in operation for longer than 1 week,
empty the equipment completely and rinse out the mixing tank with
water.
– Never clean the electrical system or system parts with a steam jet or
with spray water, as otherwise dirt and water may enter the system and
cause damage.
1.5 Equipment marking – Rating plate
Information on equipment marking or the information on the identification
plate can be found in
Ä
Section 12 “ Technical data" on page 60.
Important for all queries is the correct specification of the name and type.
This is the only way of ensuring flawless and fast processing.
General remarks
9 MAN049250 Rev. 1-01.2021