Ecoair CRYSTAL Скачать руководство пользователя страница 29

Страница: 29 / 32

Eng

lish

TROUBLESHOOTING

PROBLEM

REASON

SOLUTION

The Appliance

does not SWITCH

The power supply is not con-
nected properly.

Check the power supply connection or try in a
different power socket.

The power plug is not inserted
correctly.

Insert the power plug correctly.

The power socket is faulty or
fuse blown in the plug.

Change the fuse.

Poor Cooling

Filter might be dirty.

Clean the air filter.

Set temperature might be in-
correct

Check the set temperature. (should be below
the ambient temperature)

Windows and doors are open.

Close the doors and windows.

Discharge pipe longer than
recommended.



Change it to the recommended length (max
1.5 meter)



Keep the discharge pipe short and as
straight as possible

Remote control is outside of
range.

Use the remote control within 6 meter
range.

Appliance

cannot receive

signal from

controller

Remote Control

is not sensible

Remote control signal blocked
by obstacles.

Move away the obstacles.

Appliance does not respond to
the remote control.

Replace the batteries.

Содержание CRYSTAL































Результаты поиска

Содержание CRYSTAL

Отзывы:

Ecoair CRYSTAL, Руководство пользователя, Страница: 29 / 32

Результаты поиска

Содержание CRYSTAL

Отзывы: