Ecoair CRYSTAL Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 32

Ecoair CRYSTAL Скачать руководство пользователя страница 24

© 2018 EcoAir 23 All rights reserved

Eng

lish

SET BUTTONS

Under cooling mode, press "+" or "-" button to increase or decrease set temperature by 1 °C.

Set temperature range is between 16°C - 30°C. Under auto, drying or fan mode, this button is
invalid.

QUICK SET UP

FAN BUTTON

Press this button to select:



Auto



Low



Medium



High

These fan speeds can be selected in cooling and fan modes only.

SLEEP BUTTON

TIMER BUTTON



When unit is on, press the timer button to set Timer Off. T-OFF and H icon will be blinking, With-
in 5s, press or button to adjust the time for Timer Off. Pressing or button once
will increase or decrease the time by 0.5h. Holding or button for 2s, time will change
quickly. Release the button after your required setting time is reached. Then press TIMER button
to confirm it. T-OFF and H icon will stop blinking.



When unit is off, press this button to set Timer On. T-ON and H icon will be blinking. Within 5s,
press        or       button to adjust the time for Timer On. Pressing        or       button to adjust the
time for Timer On. Pressing       or        button once will increase or decrease the time by 0.5h.
Holding       or        button for 2s, time will change quickly. Release the button after your required
setting time is reached. Then press TIMER button to confirm it. T-ON and H icon will stop blink-
ing.



Cancel timer ON/OFF: If Timer function is set up, press TIMER button once to review the remain-
ing time. Within 5s, press TIMER button again to cancel this function.

Press this button to select sleep mode. (Works in Cooling and Dry Mode only)



The preset temperature will increase by 1°C after the first hour.



The preset temperature will increase by 2°C after two hours. The appliance will operate in this
temperature until it is switched off.



Use this mode for bedtime, the appliance will reduce the cooling as you fall asleep since our
body temperature tends to come down during that period.

«
...
22
23
24
25
26
...
»

Содержание CRYSTAL

































Отзывы:

Нет отзывов