Ecoair CRYSTAL Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 32

Ecoair CRYSTAL Скачать руководство пользователя страница 23

© 2018 EcoAir 22 All rights reserved

Eng

lish

CONTROL PANEL

QUICK SET UP

Display Screen

Set buttons



After switching ON, the appliance will respond with a beep sound. After that, you can operate
the appliance with the control panel or remote control.



Under ON status, when pressing any button on control panel, the appliance will give out a
sound. Meanwhile, corresponding indicator light on control panel will be on.



Under OFF status, there is no display on the control panel.



Under ON status, the set temperature will show on the display control panel only in cooling
mode.



For any other modes, the display will not show the temperature.

ON / OFF BUTTON

Press the ON/OFF button to switch on and off.

MODE BUTTON

Press this button to select :

COOL: When cooling Mode indicator is on, the appliance will operate in cooling mode. Display shows
the set temperature.

DRY: When drying Mode indicator is on, the display shows nothing. Appliance will operate at low
speed only.

FAN: When fan mode indicator is on, the display shows nothing. The appliance only blows air in the
ambient temperature as a fan does.

Fan button

Timer button

Mode button

Sleep button

ON/OFF button

Cool mode indicator

Dry mode indicator

Fan mode indicator

Fan speed indicator

«
...
21
22
23
24
25
...
»

Содержание CRYSTAL

































Отзывы:

Нет отзывов