© 2018 EcoAir 11 All rights reserved
Eng
lish
INSTALLATION
CONTINUOUS DRAINAGE FROM MIDDLE DRAINAGE PORT
Water can be automatically emptied from the middle drainage port with a 14mm inner diameter
hose (Not included in the package) which can be ordered from our website:
www.ecoairdirect.com
INSTALLATION OF CONTINUOUS DRAINAGE
STEP 1. Remove the continuous drainage cap by turn-
ing it counter clockwise then remove the rubber plug
form the middle drainage port.
Continuous
drainage cap
Rubber plug
STEP 2. Screw the drain connector to the drainage port by
turning clockwise.
Drainage connector
STEP 3. Insert the drainage hose (14mm) into the
drainage connector.
Make sure the drainage hose goes downward from
the middle drainage port.
The end of the drainage hose should not be outside
when temperature
is
below 1°C.
Drainage hose
NOTE: When using continuous drainage option;
Place the appliance on a level surface
Make sure the continuous drainage hose is clear of any
obstructions.
The drainage hose should be placed downwards from
the drainage ports.
Do not bend or kink
the drainage hose.
IF ABOVE NOT FOLLOWED, APPLIANCE CAN LEAK WATER!
Middle drainage port
* Store both the cap and plus safely for use when not in
continuous drainage mode