Introduction to buttons on the remote control
9) I
Feel Button
Press this button to start I FEEL function and
11
:
F-
11
will be displayed on the remote controller. After
this function is set, the remote controller will send the detected ambient temperature to the con
troller and the unit will automatically adjust the indoor temperature according to the detected
temperature. Press this button again to close I FEEL function and
11
:
F.
11
will disappear.
• When I FEEL function is turned on, the remote controller should be positioned within the area
where the indoor unit can receive the signal sent by the remote controller.
* IFEEL function is not available on all models.
10) Timer Button
• Whilst remote is "ON" press this button to set timer OFF( HOURS OFF); Whilst "OFF" press this
button to set timer ON (HOURS ON).
• Press
11
_.
11
or
II
T
II
button to adjust timer setting (time will change quickly if holding
11
_.
11
or
II
T
II
button). Time setting range is 0.5-24hours. Press this button again to confirm
timer setting and the characters of HOUR ON (OFF) will stop flashing. If the characters are
flashing but you haven't pressed the timer button, the timer setting status will quit after Ss. If
the timer is confirmed, press this button again to cancel timer.
11) WiFi Button
Press
II
WiFi
II
button to the WiFi function on or off. When the WiFi function is turned on, the
11
WiFi
II
icon will be displayed on remote controller;
•
This function is only available for some models.
•
In order to connect a handheld smartphone, tablet or laptop please visit ecoair.org for fur
ther instructions.
12) Light Button
Press this button to turn on the display's light and press this button again to turn off the display's
light.
© 2018 EcoAir
8
All rights reserved