PROTECTED
GROUNDED
Indoor
Wi-Fi Surge Protector
INSTRUCTION GUIDE
Rating: 120 Vac, 60 Hz, 15A
SETUP INSTRUCTION
RESET THE Wi-Fi SURGE PROTECTOR
SMARTPHONE SETUP
CAUTION! INDOOR USE ONLY!
Do not use Wi-Fi Surge Protector
in outdoors, damp, or wet locations.
READ ALL INSTRUCTIONS
before using the Wi-Fi Surge Protector.
RECOMMENDATION:
The closer the Wi-Fi Surge Protector is
located to a WiFi router during set-up, the better the signal strength
will be for initial configuration and subsequent programming.
Mac address:
If your router identifies by Mac address, please
key in the code number shown in the code label of the unit.
i.e., 3x:2x:7x:0x:Cx:Cx
!
!
BLINKING LIGHT
Wi-Fi Surge Protector
is ready for programming
FAST BLINKING LIGHT
Wi-Fi Surge Protector
cannot find a WiFi router.
Please reset.
LIGHT
SOLID LIGHT:
Programming is finished and
the Wi-Fi Surge Protector is
now ready to be used via ECO
Plugs APP
NO LIGHT:
Wi-Fi Surge Protector is
rebooting to default settings
POWER BUTTON
Press this button to turn the
controlled outlets on and off
CIRCUIT BREAKER SWITCH
Manually turns ALL
receptacles ON/OFF
RESET:
Also used to reset the Wi-Fi
Surge Protector device (see
instructions below)
This is how you perform a factory reset of the Wi-Fi Surge Protector
blinking
OFF
blinking
STEP
2
Press and hold the power button
STEP
1
Turn on the power Switch at side.
STEP
3
While holding the power button,
plug the Wi-Fi Plug into a 120Vac
wall outlet, THEN release the power
button when the light turns off.
STEP
4
Finished! You can now start
setting up the ECO Plugs APP with
the Wi-Fi Plug
(iOS 7 or higher)
(Version 4 or higher)
ECO Plugs
DOWNLOAD THE ECO PLUGS APP:
You can download the ECO Plugs App from either the Apple
APP Store (iPhone) or the Google Play Store (Android)
Scan the QR Codes below or search for ‘ECO Plugs’
*If you purchase more than
one ECO Surge Protector
, setup each device
one
by one
.
STEP 1
STEP 2
Plug with wall outlet
then turn on the
power Switch at side.
Your phone
Tap the
Wi-Fi/WLAN icon
Wi-Fi/WLAN
on
Your phone
Wi-Fi
Xyz95
xrgtg4
Home
ECO-XXXXXXXX
STEP 3
STEP 4
Your phone
abcde
Xyz95
xrgtg4
Home
Select the
ECO-XXXXXXXX
ECO-XXXXXXXX
Select Wi-Fi Network
Device [ECO-XXXXXXXX]
Home Router
Other Router A
Other Router B
USA
Enter Zip Code:
(Named This Device)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router
Password:
STEP 5
STEP 6
Fill in all your information.
*If this ECO-XXX network does not show in your list, perform a factory
RESET of the
Wi-Fi Plug
*If your router does not show up in the list, press the icon to
manually enter your router’s information
EX: USA
EX: CANADA
USA
Enter Zip Code:
(Named This Device)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router Password:
USA
Phone Area Code:
(Named This Device)
416 (Toronto)
2142 (Cambridge)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router Password:
/
Save Setting
Join
STEP 7
*Your smartphone should reconnect to your home router. If it does
not, go back into your phone WiFi settings to connect back to it.
*
For Canada:
Please select the Canada, entering the phone area code
instead of zip code.
Receptacles For controlled
devices(4) (Will only be
controlled via ECO Plugs app
as a group. CANNOT be
controlled individually)
Constantly ON Powered
Receptacles–Not WiFi
Controlled (2)
Wi-Fi
™
Status Indicator
Your phone
Setting
!
Go into your phone’s setting
(Normally is as gear icon symbol first.)
Select the ECO Plugs #
(ECO-XXXXXXXX)
which labelled on the product.
!
Tap the
ECO Plugs APP
Your phone
ECO Plugs
Select the Wi-Fi home router that
you want to connect to the ECO
Wi-Fi Plug or tap ( )
(EX: Home Router)
Name Device (Lamp, TV, small appliances) and Router Password, click the
SAVE SETTING
or
JOIN
button.
Fill in Country,
Zip Code (USA Only)
Phone Area Code (CANADA Only)
*
iOS:
If you can’t find the button, please click in the password section.
Join
WORKS WITH
amazon alexa
PR
OTE
CTED
GROUNDED
Grounded/Protected
Indicators
