ECO Spot LED C2
0PC
E
User Manual
Copyright © 20
20
Globus New Media LLC
Page 1
Package Contents
Projector with
driver and
power cord
, lens
Test
Welcome
Gobo
Gobo Holder
Allen key for yoke adjustment
Safety Information
Electrical Safety
Warranty
One Year from Date of Purchase. Keep your receipt for reference and
contact your dealer in case of warranty issues.
ECO Spot™ LED C20PC
E
User Manual
Thank you for choosing an ECO Spot™ Gobo projector. This manual
covers the ECO Spot C2
0PC
E
.
Please read this manual before installing or operating this fixture,
follow the safety precautions listed below and observe all warnings.
•
Place your fixture at a suitable place with good air flow.
•
Keep flammable materials away from the fixture.
•
Minimum distance to flammable material = 1 ft (0.3m).
•
Provide a minimum clearance of 4 in (10cm) around air vents.
•
Use only genuine spare parts for part replacement.
•
Do not look directly into the lamp; it can result in eye damage.
•
Always unplug the unit from the power mains before any service is done.
•
Light fixtures should be installed and maintained only by qualified personnel with
experience in lighting equipment and general electrical experience.
•
Disconnect the fixture from AC power before handling the fixture.
•
Always ground (earth) the fixture electrically.
•
Use only a power source that complies with local building and electrical codes and
has both, overload and ground-fault protection.
•
Do not use the fixture if the power cable or power plug is in any way damaged,
defective or wet, or if they show signs of overheating.
