0549-991-41---50a_2019.11.indd
ETS 42
0549-991/42a
Page 16 of 18
Operator manual
5 SERVICE
5.1
Care/checking to be carried out by the operator
Warning:
Disconnect the installation before carrying out any work on the swing door!
5.1.1
Switching off
• Select the operating mode MANUAL
or
• Pull out the mains plug.
5.1.2 Care
• Clean the floor within the area of the door wing.
• Clean the outside of the drive mechanism covering with a moistened rag.
Warning:
Do not use running water or high-pressure machines for cleaning the drive mechanism!
Attention:
Do not use any metal brushes or chemical products for cleaning the installation!
5.1.3 Checking
The installation must be checked at regular intervals, at least every 2 months (checking of the
different elements as far as these are included in the installation):
• When the door wing is moved by hand, can you hear any unusual grinding or screeching noi
-
ses?
• Check the function, the free access to and identification of the emergency stop button (optio
-
nal).
• Check the correct fastening of the drive mechanism covering.
Attention:
Please contact immediately your after-sales service if you detect a damage or malfunc
-
tion that you cannot repair yourself.
5.2
Maintenance/checking carried out by the after-sales service
Warning:
In order to guarantee the safety of the users at all times, the installation must be che
-
cked with regard to its safe condition before the first commissioning and during normal
operation,
at least once a year,
by a expert. The correct maintenance/checking must be
confirmed by entering the date and signature into the control booklet.
Note:
We recommend to conclude a maintenance contract with the manufacturer of the
installation, respectively with his authorized distribution partner.
