Eco Power Equipment IAQH Series, Инструкция по установке и эксплуатации

Страница: 13 / 82

IAQH-1000 Manual
B. DESCRIPTION OF THE PRODUCT
a. Intended Use and Reasonably Foreseeable Misuse
The IAQH is intended to be used as a temporary construction heater, primarily intended for
temporary use in heating buildings or structures under construction, alteration, or repair. The
unit is ideal for large scale commercial and industrial heating. The unit is intended for indoor air
heating and air quality maintenance. It is ideal for construction projects including hospitals, high
rise, big-box stores, distribution centers, wood frame multi-family low rise, and other heating
and air quality control applications.
The IAQH shall not be used as a permanent heating system, it has been designed and complies
with CSA 2.14 and ANSI Z83.7 directives, which are specific to temporary heating of a building
structure under construction, alteration, or repair.
Adequate ventilation is critical to application safety and performance, see below for more
details.
The heater is designed and approved for use as a construction heater in accordance with the
Standard for Gas-Fired Construction Heaters ANSI 283.7 • CSA 2.14. CHECK WITH YOUR LOCAL
FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat producing products in specific
applications. Your local authority can advise you about these other standards.
The IAQH shall be used with the following original accessories and components only:
●
Eco Power Equipment EHT and ERA Type Ducting
●
IAQH Remote Thermostat
●
IAQH Temporary Flue System
13