Outdoor
Wi-Fi Outlet
INSTRUCTION GUIDE
125Vac, 60Hz, 15A Resistive,
15A General Use, 1000W Tungsten,
500VA Electronic Ballast,
120Vac, 60Hz, 8.3A Ballast, 1/2HP.
SETUP INSTRUCTION
RESET THE Wi-Fi PLUG
SMARTPHONE SETUP
ADD MULTI Wi-Fi PLUG TO THE APP
READ ALL INSTRUCTIONS
before using the Wi-Fi Plug.
RECOMMENDATION:
The closer the Wi-Fi Plug is located to
a WiFi router during set-up, the better the signal strength will be
for initial configuration and subsequent programming.
CAUTION! Suitable for use in outdoor applications.
Rain tight when mounted vertically with receptacles facing
DOWNWARD. For use ONLY with a three pronged GFCI protected
outlet. DO NOT IMMERSE IN WATER!
This device must be mounted in a vertical position with the
recepticle at least 2 feet aove the ground level.
Mac address:
If your router identifies by Mac address, please
key in the code number shown in the code label of the unit.
i.e., 3x:2x:7x:0x:Cx:Cx
!
!
BLINKING LIGHT
Wi-Fi Plug is ready
for programming
FAST BLINKING LIGHT
Wi-Fi Plug cannot
find a WiFi router.
Please reset.
LIGHT
Power Indicator
SOLID LIGHT:
Programming is
finished and the
Wi-Fi Plug is now
ready to be used
via ECO Plugs APP
NO LIGHT:
Wi-Fi Plug is rebooting
to default settings
POWER BUTTON
Press this button
to turn the Wi-Fi
Plug ON and OFF
RESET:
Also used to reset
the Wi-Fi Plug
device (see
instructions below)
This is how you perform a factory reset of the Wi-Fi Plug
blinking
OFF
blinking
STEP
1
Press and hold
the power button
STEP
2
While holding the power button,
plug the Wi-Fi Plug into a 120Vac
wall outlet, THEN release the power
button when the light turns off.
STEP
3
Finished! You can
now start setting up
the ECO Plugs APP
with the Wi-Fi Plug
(iOS 7 or higher)
(Version 4 or higher)
ECO Plugs
DOWNLOAD THE ECO PLUGS APP:
You can download the ECO Plugs App from either the Apple
APP Store (iPhone) or the Google Play Store (Android)
Scan the QR Codes below or search for ‘ECO Plugs’
*If you purchase more than
one ECO Plug
, setup each device
one by one
.
STEP 1
STEP 2
Plug in the
ECO plug
Your phone
Tap the
Wi-Fi/WLAN icon
Wi-Fi/WLAN
on
Your phone
Wi-Fi
Xyz95
xrgtg4
Home
ECO-XXXXXXXX
STEP 3
STEP 4
Your phone
abcde
Xyz95
xrgtg4
Home
Select the
ECO-XXXXXXXX
ECO-XXXXXXXX
Select Wi-Fi Network
Device [ECO-XXXXXXXX]
Home Router
Other Router A
Other Router B
USA
Enter Zip Code:
(Named This Device)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router
Password:
STEP 5
STEP 6
Fill in all your information.
*If this ECO-XXX network does not show in your list, perform a factory
RESET of the Wi-Fi Plug
*If your router does not show up in the list, press the icon to
manually enter your router’s information
EX: USA
EX: CANADA
USA
Enter Zip Code:
(Named This Device)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router Password:
USA
Phone Area Code:
(Named This Device)
416 (Toronto)
2142 (Cambridge)
(Wi-Fi’s password, if needed)
Canada
Other
Home Router
Name Device:
Wi-Fi Router(WLAN):
Enter Wi-Fi Router Password:
/
Save Setting
Join
STEP 7
*Your smartphone should reconnect to your home router. If it does
not, go back into your phone WiFi settings to connect back to it.
*
For Canada:
Please select the Canada, entering the phone area code
instead of zip code.
Your phone
Congratulations!...
Complete setup...
Successful !
ECO
Your phone
Light 1
STEP 8
Repeat steps 1-8 for each additional device. Remember to give each device a
different name (for example, Light 1, Light 2, etc.).
*
Note:
each controlled device requires a separate ECO Wi-Fi Plug.
Receptacles (2)
For controlled
devices (Will only
be controlled via
ECO Plugs app as
a group. CANNOT
be controlled
individually)
Wi-Fi
™
Status Indicator
Your phone
Setting
!
Go into your phone’s setting
(Normally is as gear icon symbol first.)
Select the ECO Plugs #
(ECO-XXXXXXXX)
which labelled on the product.
!
Tap the
ECO Plugs APP
Your phone
ECO Plugs
Select the Wi-Fi home router that
you want to connect to the ECO
Wi-Fi Plug or tap ( )
(EX: Home Router)
Name Device (Lamp, TV, small appliances) and Router Password, click the
SAVE SETTING
or
JOIN
button.
Fill in Country,
Zip Code (USA Only)
Phone Area Code (CANADA Only)
*
iOS:
If you can’t find the button, please click in the password section.
Join
WORKS WITH
amazon alexa
