3
©2009 Eco-Orlan USA LLC. All Rights
Reserved
.
Revised August 2009.
WARNING!
Attention to safety is critical in all phases of boiler system design, installation, operation and maintenance.
1. Safety
During installation the boiler and some components may be heavy or sharp. During operation parts of the boiler and
associated plumbing can be very hot which can cause burns or fires. The proper caution and methods need to be used while
loading wood when the boiler is hot.
It is the responsibility of the installing technician to see that all controls are configured and operating properly when the boiler
installation is completed.
2. Boiler’s Usage
Paxo® wood gasification boilers are designed to operate in the 91% to 95% overall system efficiency range when properly installed
and operated.
The boiler has been independently tested and has been certified to conform to ISO 9001, TUV, and CE. Testing and certification for
(North American certifications) UL 391, ETL and CSA are in progress.
Orlan® boilers are efficient and environmentally friendly. Heating your home and domestic water heating can work together with
other heating systems. With its high efficiency you will need less wood for the heating season. There is no visible smoke when fully
operating. Clean burning results in little or no creosote buildup with minimal risk of a chimney fire.
Wood is the main fuel for the Paxo® boilers.
Wood used as a fuel should be at max 15-20% moisture content and length about 2 inches smaller than the loading chamber.
Some alternative fuel is acceptable:
- lignite as 10-15 cm diameter blocks
- wood cut into small pieces (shavings, furniture waste and so on) is acceptable as the mix for the main fuel at 50/50% mixture.
WARNING!
Use of fuel other than dry wood will result in unpredictable operation, poor efficiency and compromise the durability
of the boiler. The manufacturer or/and Eco-Orlan USA LLC are not responsible for problems caused by using
unapproved fuels.
