Eclipse TD508MK3, Руководство пользователя, Страница: 8 / 26

− 3 −
ENGLISH
GERMAN
FRENCH
IT
ALIAN
SP
ANISH
On a floor or shelf On a floor or shelf
Screws X4
Speaker base cover
Safety cable
3
Remove the screws from the bottom of the speaker base
and keep to hand for use later.
4
Stand the speaker upright.
5
Remove the cover from the speaker base.
6
Remove the safety cable from the speaker base.
Speaker base
Screwdriver
1
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
2
Place the speaker on its side.
- Adjusting the angle of the speaker arm -
❶
Speaker
❶
Speaker
Speaker base
Screw
Screwdriver
Keep screws to hand for use later.
Tip
･
If you wish to use the speaker at the standard angle position (as it is when removed from its packaging), there is
no need to adjust the angle.
･
You can increase the speaker angle by 15° from its standard position (as it is when removed from its packaging)
by adjusting the speaker arm. (The angle of the speaker [including fine adjustments
➡
refer to P.32] can be
adjusted by up to a maximum of +30°.)
Tip