Eclipse TD508MK3, Руководство пользователя, Страница: 17 / 26

− 3 −
GERMAN
FRENCH
IT
ALIAN
SP
ANISH
ENGLISH
Screw
(included
with the
CB1)
Safety cable
(included with the CB1)
Fixing point
9
Remove the retaining bolt and the angle adjustment bolt,
and then lift the speaker arm from the speaker base.
10
Install the safety cable to the bottom of the speaker.
Screwdriver
Speaker arm
Speaker base
Front
Be careful not to get your hand or fingers caught in the
movable part of the speaker arm.
Caution
Safety cable
(included with the CB1)
･ Pass the safety cable from the speaker front side into
the wire fixing point.
･ TD508MK3 speakers only: Use the screw (binding
M5 x 8) that is included with the bracket.
･ TD510MK2 speakers only: Use the screw (binding
M4 x 8) that is included with the bracket.
Make sure that the screw installation holes are
correct.
･
Securely connect the safety cable to the speaker to
prevent the speaker from falling down.
･
Place the speaker on top of the soft cloth while
working so as not to damage the speaker.
Caution
Angle adjustment bolt
❹
Hexagonal wrench
(small)
❸
Hexagonal wrench
(large)
The retaining bolt and angle adjustment bolt will be
used later, so keep them to hand.
Tip
Retaining bolt