background image

 

 

 

 

 

 

 

 

 

WC200 

‘M’ Series Roof Controller

 

User Guide 

 

 

The 

“M” Series Roof Controller

 is an electronic switching unit that enhances the benefits you can 

enjoy from your 

Opening Roof

.  The unique design of the 

“M” Series Roof Controller 

ensures easy 

and convenient operation of your Roof

 

and will even memorise your preferred settings.  A key feature 

of the unit is a 

Rain Sensor

 that is mounted on the roof that will automatically close all roof banks when 

it starts to rain. 

 

 

The 

“M” Series Roof Co

ntroller 

operates by use of the six buttons on the switch plate.  When the 

buttons are pushed individually they operate the primary functions of the unit.  When two buttons are 
pressed together, additional secondary functions are operated.

 

Содержание M Series

Страница 1: ...n of your Roof and will even memorise your preferred settings A key feature of the unit is a Rain Sensor that is mounted on the roof that will automatically close all roof banks when it starts to rain The M Series Roof Controller operates by use of the six buttons on the switch plate When the buttons are pushed individually they operate the primary functions of the unit When two buttons are presse...

Страница 2: ...in protection system and the red light will go OFF Push the RAIN button again and the red light will come ON and it will be in rain protection mode once again When the rain protection system is ON the system is waiting until it rains When it starts to rain the raindrops falling onto the Rain Sensor which is mounted on the roof will cause all roof banks to close Once it stops raining and the Rain S...

Страница 3: ... 3 Open roof 1 to the desired position with the OPEN button 4 Press STEP to change the active roof to roof 2 3 4 etc 5 Press OPEN to get roof 2 3 4 to the desired position 6 Press Hold AUTO then RAIN almost simultaneously Hold down the buttons If the controller has accepted this position the LED light will flash 3 times If not try steps 1 6 again You can test this by wetting the rain sensor plate ...

Страница 4: ...tion mode switched ON If rain is detected in this period the roof will close and only go through the start up sequence once the rain sensor has dried out If you have the Battery back up function in use your system will continue to work for several days without 240V mains power Please Note Power failures surges storms can damage electrical equipment Cleaning A build up of dirt or bird droppings may...

Отзывы: