Eclipse CD5030, Руководство пользователя

Страница: 79 / 113

Making changes with Function Mode
79
XIV
Making changes with Function Mode
Various Settings
A variety of settings can be changed.
Switching the Function Mode
The Menu selection mode is activated.
The function mode is activated.
When the button is pressed, the
setting item changes in the following
order.
GuideTone
↔
Clock ON/OFF
↔
Clock
Adjust
↔
Demo
↔
HD Radio
*1
↔
AUX
ON/OFF
*2
↔
AUX Sensitivity
*2
↔
S/A
Sensitivity
↔
BT Audio ON/OFF
↔
BT
Audio Setting
*3
*1: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. For details, see
refer to "HD Radio reception
settings" on page 89.
*2: For details, see refer to "Switching
the AUX mode on and off" on page
102 and refer to "Changing
auxiliary input sensitivity" on page
103.
*3: For details, refer to "Bluetooth
audio setup" on page 36.
Setting the guide tone
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
The guide tone setting mode is
activated.
Setting clock display (Clock ON/
OFF)
Switches the clock display to ON/OFF.
The clock display setting mode is
activated.
ATTENTION
The clock display can also be turned on and off
by pressing the button [6] while the power is
turned off.
1
Press the [ /MENU] button for
more than one second.
2
Select "FUNC" by pressing the [ ]
or [ ] button, and then press the
[ENTER] button.
3
Select a setting item by pressing
the [ ] or [ ] button.
1
Select "Guide Tone" by pressing
the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Select "ON/OFF" by pressing the
[ ] or [ ] button.
1
Select "Clock ON/OFF" by
pressing the [ ] or [ ] button.
2
Press the [ENTER] button.
3
Turn the clock display "ON/OFF"
by pressing the [ ] or [ ] button.