Basic operation
61
Ba
si
c
opera
tio
n
5. Performing operations on a retrieved map
When retrieving a map, either a map with a pinpoint search result or without a pinpoint search
result (vicinity) will be displayed. Information on POIs can be displayed from the map retrieved.
Performing operations on a displayed map
The following conditions are necessary to display a map from a pinpoint:
1
When entering a POI name in
"Retrieving a map using a POI name"
2
When
"Retrieving a map in the event of an emergency"
3
When
"Retrieving a map using an intersection name"
4
When a corresponding POI is made available when
"Retrieving a map using a freeway
exit/entrance name"
The following operations are enabled on a retrieved map.
■
Changing the position
Scroll to change the position.
■
Displaying POI information
The POI data displayed as per the conditions described in steps
1
to
4
above is shown.
Displaying POI information
Touch .
• Information on the POI is displayed
●
When a search is made using a pinpoint
●
When a search cannot be made using a pinpoint
Info.
• Information on POIs can be displayed only when the method described in
1
to
4
above was used to call up a map.
• There may be no information available for some POIs.
Содержание AVN 6600
