Eclipse AVN 5495, Руководство пользователя

Страница: 114 / 199

112
Navigation guidance
4. Starting, pausing and restarting route guidance
Starting route guidance
When the route search is complete, the all-route display screen appears. Touch on
the all-route display screen to start route guidance. Route guidance can be paused and
restarted.
Touch in the all-route
display screen.
●
Route guidance is started.
● If is pressed after the all-route
map appears, or you do not operate
the device for at least 3 seconds after
you start driving, route guidance will
automatically start.
Demonstration
Once the route search is complete, you can watch a demonstration before starting route
guidance.
Touch and hold for at least
3 seconds.
Press (or / )
while the demonstration is in
progress.
●
The demonstration stops.
● If you start driving while the
demonstration is in progress, the
demonstration will stop and route
guidance will start.
Guide
Guide
NAVI
●
Demo in progress screen
Guide
NAVI MENU DEST
●
The demonstration (demo) can be viewed in the all-route map screen, displayed
after both destination settings and route search have been completed (before
route guidance). However, the demonstration is not available while driving.
●
To increase the speed of the demonstration, make the reduction scale greater.
(Refer to the Section
"Switching the map reduction scale" on page 32)
●
To decrease the speed of the demonstration, make the reduction scale smaller.
(Refer to the Section
"Switching the map reduction scale" on page 32)